Storefront Commerce Category

Home > Browse All > Safety

Showing 1 - 24 of 1039 Results

Page: 1 2 3 4 5 6 7 8 ... 44

Pro-grade goggle with polycarbonate lens and chemical-resistant rubber headband. Lens treatment reduces fogging. Usable with most eyeglasses and half-mask respirators. Meets ANSI Z87.1-1989 and OSHA requirements. Lens Thick. In. 1/2".

GOGGLE IMPACT, DUST & CHEMICAL RESISTANT

Quantity:

Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115, fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). Helps minimize sound transfer. Applied with conventional caulking equipment (excellent caulk rate). Expansive UL and other third-party listed systems.

#CP25WB+ 20/0Z SAUSAGE TUBE FIRE BARRIER CAULK

Quantity:

Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115. Fire Resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079).

CP25 2 GALLON FIRE BARRIER CAULK

Quantity:

3M FireDam 150 Caulk is an economical alternative for metal pipe applications in an endotermic, non-intumescent, water-based form. high flow rate in a non-sag formulation; easily spread to a smooth finished surface; water dispersed, non-flammable; low shrinkage; provides up to a 3-hour fire rating; applied with conventional caulking gun, pneumatic pumping equipment or a putty knife.

#FD 150+ RED FIRE BARRIER SEALANT 1/10 GAL

Quantity:

Fire Barrier Self-Locking Pillows act as a through penetration fire-stop, heat shield and firebreak protection material. Ideal for fire-stopping medium to large openings with power or communication cables, conduits and cable racks or trays.

#FB249SL 2X4X9" FIRE BARRIER PILLOW

Quantity:

No. CP-25. Protects against fire, smoke, noxious gas and water for through penetrations. Desc.: Latex caulk

FIRE BARRIER CAULK WATER BASED 1/10TH GAL CRTDGE

Quantity:

Fire Barrier Self-Locking Pillows act as a through penetration fire-stop, heat shield and firebreak protection material. Ideal for fire-stopping medium to large openings with power or communication cables, conduits and cable racks or trays.

#FB269SL 2X6X9" FIRE BARRIER PILLOW

Quantity:

Ideal for sealing single or multiple through penetrations in fire-rated construction. Typically used in mechanical, electrical, data and plumbing applications to firestop metallic pipe, conduit, cables, cable trays, busways, combos, insulated pipe and HVAC ducts passing through fire-rated floors and walls. Also used to firestop blank openings in floors and walls.

#FIP 1-STEP FIRE BARRIER FOAM 12.85/OZ CARTRIDGE

Quantity:

Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115. Fire Resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079).

IC15WB FIRE BARRIER SEALANT, 20 OZ

Quantity:

Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479). Ideal for electrical, data and communication applications.

PASS THROUGH DEVICE PT4SD, 4" SQUARE

Quantity:

Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479), UL classified L rating, Hot and Cold Smoke Seal (achieved with foam smoke seals and 3M Fire Barrier Sealant or Putty per system details).

PASS THROUGH SQUARE BRACKET 4".

Quantity:

Sprayable water-based material dries to form a durable, elastomeric firestop coating. This material will firestop building joints, perimeter joints (curtain wall), and through penetration seals. Provides up to 4-hour fire protection in construction joints.

5GALLON RED FIRE DAM SPRAY 200

Quantity:

Non-combustible material (ASTM E 136), Meets ASTM C 1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings. Approved for use in all UL-listed through penetration 3M firestop systems, Easy to transport and carry, Convenient, hand-tear dispensing.

FIRE BARRIER PACKING MATERIAL, 4"X20' ROLL

Quantity:

Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479), UL classified L rating, Hot and Cold Smoke Seal (foam smoke seal).

PASS THROUGH DEVICE, PT2RD, 2" ROUND

Quantity:

Used in conjunction with the 2 Round 3M Fire Barrier Pass-Through Device.

PASS THROUGH MOUNTING BRACKET, PTRMB 2" ROUND

Quantity:

Replacement foam plugs for 2" Square 3M Fire Barrier Pass-Through Device. These foam plugs enhance the Cold and Hot smoke seal (device can achieve UL classified L-Rating with foam plugs and 3M Fire Barrier Sealant or Putty MP+, see system details).

PASS THROUGH DEVICE FOAM PLUG, 4" SQUARE

Quantity:

Perimeter Fire Barrier Tested up to 3 hours in accordance with ASTM E 2307. Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115. Fire Resistance tested for construction joint systems in accordance with ASTM E 1966 (UL 2079).

WATER TIGHT SEALANT 1003 SL, 10.1 CARTRIDGE

Quantity:

3M Fire Block Sealant FB 136, 10.1 fl. oz., Cartridge. A versatile, one component, water-based, non-combustible draft, smoke and fireblocking sealant, designed to resist high temperatures and smoke passage in non-rated construction. Meets ASTM E 136 noncombustibility requirements. Gray color.

FIRE BLOCK SEALENT/NON COMECL.CONSTRUCTION 11OZ

Quantity:

Sealant remains elastomeric (compression/extension capability of 19%). Acts as an acoustic barrier by minimizing noise transfer and helps create a smoke seal.

FD150 RED FIRE BARRIER SEALANT, 20OZ SAUSAGE

Quantity:

Intumescent wrap strip primarily used in top-side firestop installations. Available as precut strips for 2", 3"or 4"plastic pipes and as an 8'roll which can be cut to length for larger plastic piping penetrations.

FIRE BARRIER TUCK-IN 3" STRIPS WS300

Quantity:

Intumescent wrap strip primarily used in top-side firestop installations. Available as precut strips for 2", 3"or 4"plastic pipes and as an 8'roll which can be cut to length for larger plastic piping penetrations.

FIRE BARRIER TUCK-IN 4" STRIPS WS400

Quantity:

Intumescent wrap strip primarily used in top-side firestop installations. Available as precut strips for 2-inch, 3-inch or 4-inch plastic pipes and as an 8 foot roll which can be cut to length for larger plastic piping penetrations.

FIRE BARRIER TUCK-IN WS ROLL 8.2'.

Quantity:

Works with most non-metallic and metallic insulated penetrants. Used for in-hole firestop installations or in conjunction with 3M Fire Barrier RC-1 Restricting Collars. When the wrap is installed in-hole in conjunction with a 3M Fire Barrier Sealant or Moldable Putty+, it also provides a cold smoke seal, which helps prevent the spread of toxic gases and other combustion by-products even before heat initiates the intumescent process.

FIRE BARRIER WRAP ULTRA GS 2"X40'.

Quantity:

A one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop wall-openings and through penetrations in fire-rated assemblies.

#MPP+ 7X7" FIRE BARRIER PUTTY PAD

Quantity:

Page: 1 2 3 4 5 6 7 8 ... 44