Home page
Welcome, Guest | Sign In
Showing 81 - 90 of 402 Results
 
Page: 1 2 3 4 5 6 7 8 9 10 > >> 
Results Per Page: 10 | 25 | 50
Hide Thumbnail
Item Number Sell Price Availability (Dft Whse)
Description
For use with standard dimensional lumber. Steel construction with gray baked enamel finish. Dim. In. W x L: 12 x 14 NAT172619 $1.99 In Stock
For use with standard dimensional lumber. Steel construction with gray baked enamel finish. Dim. In. W x L: 12 x 14
For reinforcement of right angle corner joints. Zinc plated finish. Lgth. In.: 6 Other: w/o Screws NAT220277 $3.29 In Stock
For reinforcement of right angle corner joints. Zinc plated finish. Lgth. In.: 6 Other: w/o Screws
Impact resistant. 100 mil. thickness is 10 times stronger than glass. Reduces heat loss. Will not become yellow or brittle.  Meets ANSI and ASTM specifications. 28" x 30" sheeting. .100 mil. thick. WAR22460 $24.99 In Stock
Impact resistant. 100 mil. thickness is 10 times stronger than glass. Reduces heat loss. Will not become yellow or brittle. Meets ANSI and ASTM specifications. 28" x 30" sheeting. .100 mil. thick.
Set includes 8, 12, and 18 inch magnetic organizers, Steel construction for dependable and long service life. WIM11367 $12.99 In Stock
Set includes 8, 12, and 18 inch magnetic organizers, Steel construction for dependable and long service life.
Drop forged steel. Hot galvanized or self-colored finish. Round pins and cotter keys, unless nuts and bolts specified. Locking nuts available. Meets ASTM Spec. F1145-92, Type 1, Grade 1. Closed Lgth. In.: 16-1/2 Dia. & Take-up In.: 1/2 x 9 CIC03076 $45.49 Out of Stock
Drop forged steel. Hot galvanized or self-colored finish. Round pins and cotter keys, unless nuts and bolts specified. Locking nuts available. Meets ASTM Spec. F1145-92, Type 1, Grade 1. Closed Lgth. In.: 16-1/2 Dia. & Take-up In.: 1/2 x 9
Drop forged steel with hot galvanized finish. Threaded components are heat treated. Note: Flat pin head and cotter loads based on 5:1 safety factor. Size In.: 3/8 Max. Load Tons: 1.1 CIC21515 $18.39 In Stock
Drop forged steel with hot galvanized finish. Threaded components are heat treated. Note: Flat pin head and cotter loads based on 5:1 safety factor. Size In.: 3/8 Max. Load Tons: 1.1
Hot galvanized. Bolt Dia. In.: 5/8 Shank Lgth. In.: 1-3/4 Pattern No.: 27 CIC26173 $11.69 In Stock
Hot galvanized. Bolt Dia. In.: 5/8 Shank Lgth. In.: 1-3/4 Pattern No.: 27
Rust-resistant finish. Ext. In.: 5 CRFUHS3 $2.89 In Stock
Rust-resistant finish. Ext. In.: 5
Dim. In.: 1/2 x 36 Ga.: 19 KIR2103 $1.89 In Stock
Dim. In.: 1/2 x 36 Ga.: 19
Sticks to many surfaces, including paint, wood, tile and more. Come off leaving no holes, marks, sticky residue or stains. Re-hanging them is easy just apply a Command Refill Strip, so you can take down, move and reuse them again and again. MMM34545 $9.79 In Stock
Sticks to many surfaces, including paint, wood, tile and more. Come off leaving no holes, marks, sticky residue or stains. Re-hanging them is easy just apply a Command Refill Strip, so you can take down, move and reuse them again and again.
Command large utility hook. Damage free hanging, removes easily, leaves no holes, residue or stains. MMM98178 $9.29 In Stock
Command large utility hook. Damage free hanging, removes easily, leaves no holes, residue or stains.
For use with 105726 and 105213 track. Recommended spacing: 2' and at all track joints. Max. door weight 450 lbs. Zinc plated finish. Desc.: Single track mount NAT104331 $5.29 In Stock
For use with 105726 and 105213 track. Recommended spacing: 2' and at all track joints. Max. door weight 450 lbs. Zinc plated finish. Desc.: Single track mount
For reinforcement of right angle corner joints. Zinc plated finish. Lgth. In.: 8 Other: w/o Screws NAT236604 $5.99 In Stock
For reinforcement of right angle corner joints. Zinc plated finish. Lgth. In.: 8 Other: w/o Screws
For use in reinforcing flat surface joints, seams and cracks. Zinc plated finish. Without screws. Dim. In. L x W: 2 x 5/8 NAT272716 $0.39 In Stock
For use in reinforcing flat surface joints, seams and cracks. Zinc plated finish. Without screws. Dim. In. L x W: 2 x 5/8
Impact resistant. 100 mil. thickness is 10 time stronger than glass. Reduces heat loss. Will not become yellow or brittle. Meets ANSI and ASTM specifications. Dim. In.: 30 x 36 Sq. Ft.: 7.50 WAR22560 $31.99 Out of Stock
Impact resistant. 100 mil. thickness is 10 time stronger than glass. Reduces heat loss. Will not become yellow or brittle. Meets ANSI and ASTM specifications. Dim. In.: 30 x 36 Sq. Ft.: 7.50
Drop forged steel. Hot galvanized or self-colored finish. Round pins and cotter keys, unless nuts and bolts specified. Locking nuts available. Meets ASTM Spec. F1145-92, Type 1, Grade 1. Closed Lgth. In.: 19-1/2 Dia. & Take-up In.: 1/2 x 12 CIC03079 $51.99 In Stock
Drop forged steel. Hot galvanized or self-colored finish. Round pins and cotter keys, unless nuts and bolts specified. Locking nuts available. Meets ASTM Spec. F1145-92, Type 1, Grade 1. Closed Lgth. In.: 19-1/2 Dia. & Take-up In.: 1/2 x 12
Showing 81 - 90 of 402 Results
 
Page: 1 2 3 4 5 6 7 8 9 10 > >> 
#

Check Out This
Month's Specials

Monthly Specials