Storefront Commerce Category

Home > Browse All > klein tools

Showing 1 - 24 of 177 Results

Page: 1 2 3 4 5 6 7 8

Increases job speed by combining taps and drivers in one tool. Six common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20). Four Screwdriver tips (#1 and #2 Phillips, 3/16'' and 1/4'' Slotted). Three Nut Driver sizes (1/4", 5/16" and 3/8"). Large Cushion-Grip handle for greater comfort and torque. Replacement tap available (Cat. No. 32518)

#32505 11-IN-1 DRIVER W/COMBO SCREW TIPS

Quantity:

Increases job speed by combining taps and drivers in one tool. Six common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20). Four Screwdriver tips (#1 and #2 Phillips, 3/16'' and 1/4'' Slotted). Three Nut Driver sizes (, 5/16 and 3/8). Large Cushion-Grip handle for greater comfort and torque. Replacement tap available (Cat. No. 32518)

#32517 MULTI-BIT TAP TOOL DRIVER

Quantity:

Starts and drives screws with one hand when working in hard to reach spaces. Cushion grip handle provides superior torque and comfort with non-slip grip. 7 shank length. 11-1/4" tool length.

#2 PHILLIPS SCREWDRIVER (SCREW-HOLDING)

Quantity:

Engineered, manufactured and tested for prying and chiseling. Plated metal strike cap protects handle from hammer blows.

#602-7DD 5/16" X 7". DEMOLITION DRIVER

Quantity:

Multi-bit driver includes 14 different screwdriver tips and a 1/4 nutdriver, Internal storage for screwdriver bits. Cushion-Grip Handle for maximum torque and comfort.

15-IN-1 MULTI-BIT SCREWDRIVER

Quantity:

Heavy-duty serrated blade for sawing. Notch on blade for scraping or removing wire insulation. Textured red handle with finger grooves. Blade Lgth. In.: 3 OAL In.*: 8

#1570-3 8" LINEMENS SKINNING KNIFE

Quantity:

Heavy-duty leather construction. Double tongue buckle. 2" wide. Size: Medium - 36" - 44"

NUMBER 5415 2IN H.D. LEATHER BELT SZ 36-44IN

Quantity:

Chrome plated. Internal flanges anchor shank for torque resistance. For use on stacked circuit boards and long bolts. Meets ANSI and MIL specifications. Hex Size In.: 1/4 Color: Red Other: 3" Shank

#630-1/4" RED CUSH GRIP NUTDRIVER

Quantity:

Accepts 1/2" square-drive hex sockets. Reversible. Drop-forged alloy steel with black finish. Lgth. In.: 15

#3238 1/2" DR RATCHETING CONSTRUCTION WRENCH

Quantity:

Strips solid and standard wire sizes 12 to 26 AWG. Hole for looping or bending wire. Hold-open spring. Plastic covered handles. OAL In.: 6

#1004 5" WIRE STRIPPER CUTTER

Quantity:

Drop-forged, tempered steel head. Fiberglass shaft with plastic alloy jacketing. Neoprene grip bonded to handle. OAL In.: 15 Head Wt. Oz.: 18

18OZ ELECTRICIANS HAMMER STRAIGHT CLAW FIB/HDL

Quantity:

Reams and smooths 1/2", 3/4" and 1" thin wall conduit ends. Ream on both inside and outside. Tempered steel construction. Shank Dim. In. L x W: 2-1/2 x 3/8 OAL In.: 7-1/2

CONDUIT FITTING/REAMING SCREWDRIVER

Quantity:

Starts and drives screws in hard to reach places. OAL In.: 5-1/4 Tip Width In.: 1/8

1/8" X 5" SCREW-HOLDING SCREWDRIVER

Quantity:

Includes 5/16" & 1/4" nutdriver, #1 and #2 Phillips, 1/4" & 3/16" slotted, #10 and #15 TORX Desc.: 10-in-1 Screwdriver/Nutdriver

#32477 10-IN-1 SCREWDRIVER

Quantity:

Short coping-style blade. Heavy-duty, non-slip handle with hanging hole. Blade Lgth. In.: 1-3/4 OAL In.: 6-1/4

#44200 CABLE SPLICERS KNIFE

Quantity:

Heavy-duty leather construction. Double tongue buckle. 2" wide. Size: Large - 40" - 48"

NUMBER 5415L H.D. 2IN LEATHER BELT SZ 40-48IN

Quantity:

Chrome plated. Internal flanges anchor shank for torque resistance. For use on stacked circuit boards and long bolts. Meets ANSI and MIL specifications. Hex Size In.: 5/16 Color: Yellow Other: 3" Shank

#630-5/16" YELLOW CUSH GRIP NUTDRIVER

Quantity:

One-piece forged steel construction. Black finish for rust resistance. Blade Lgth. In.: 3-1/2 OAL In.: 7

ALL STEEL SCRATCH AWL

Quantity:

Drop-forged steel construction. Pointed end. Dia. In.: 3/4 Lgth. In.: 30

#3245 3/4" X 30" ROUND CONNECTING BAR

Quantity:

Durable, high resolution (480 x 234px) color screen. 39" flex gooseneck with 17mm LED camera end. Includes magnetic hook and mirror attachment. Powered by lithium ion battery and charger.

BORESCOPE INSPECTION VIDEO CAMERA 2.4" SCREEN

Quantity:

Strips solid and stranded wire sizes 10 to 20 AWG. Serrated nose jaws to bend, shape or pull without nicking wire; holes for looping wire ends. Coil spring opening action. Plastic covered handles. OAL In.: 6

#1011 6" WIRE STRIPPER CUTTER

Quantity:

Includes three cabinet tip, two Phillips and two keystone blades. Desc.: 7-Pc. screwdriver set

#85076 7/PC CUSHION GRIP SCREWDRIVER SET

Quantity:

For reaming and smoothing thin wall conduit. Locks onto screwdrivers. Cap In.: 1/2, 3/4, 1

CONDUIT REAMER FOR 1/2", 3/4", 1" THIN WALL

Quantity:

Starts and drives screws in hard to reach places. OAL In.: 7-3/4 Tip Width In.: 3/16

3/16" X8" SCREW-HOLDING SCREWDRIVER

Quantity:

Page: 1 2 3 4 5 6 7 8